Can you restain stamped concrete

The 4, psi machines can quickly remove years of worked-in dirt and stains while also stripping away paint droplets left behind by a messy painter. For a few stubborn paint spots we relied on the environmentally-friendly soy-based paint stripper GL by Blue Bear. It took two of us a little more than two hours to entirely prep a square foot concrete patio. Using Ecostain saved us time and gave us greater control of finished results than a traditional concrete acid stain.

Once EcoStain has been applied you simply allow it to dry before moving ahead with sealer. Selecting the right concrete stain color for our project was easy. Kodiak EcoStain color was the winner for how well it masked the rust discoloration and pinkish tones of the faded concrete.

Allow hours for the concrete to dry after the pressure-washing before applying the stain. A pump-up garden sprayer and rag for soaking up spills are the only tools required for this step. It took less than an hour and 3 gallons of Kodiak EcoStain to stain the entire square feet patio. This stamped concrete driveway had major color loss.

The stamped concrete around this home was plagued by oxidation and erosion. Glen Roman of Staintec gave the sidewalks and patios new life by acid washing the concrete and then applying Newlook stains. A dark brown color was used for the borders while sand was used for the main fields. Decorative concrete expert Chris Sullivan recommends the following steps for color correcting stamped concrete:. For most decorative stamping work, lighter base colors are accented by darker secondary colors. In this case, he results mimic naturally weathered stone.

How can I change the color of a stamped slab after it has been poured? The customer was not happy with gray and now wants a reddish-brown color. Using a water based SS rainbow stain system will not only provide a full range of colors to choose from, but this stain system is easy to use, eco friendly and ideal for stamped and other concrete surfaces. SS rainbow stain can be applied by brush, roller or ideally a good quality industrial sprayer.

A sprayer will make quick work of applying stain while giving a natural pattern and finish. After the stain has dried, you will then want to apply a sealer to lock in the color. Sealers are also applied with rollers and brushes but can also be applied with a sprayer.

Regardless of which type of concrete colors are used, it is important to finish with a clear, water-based concrete sealer.